7. Power Switch connector (J29)
This connector is used to provide a way of the user to turn the system on.
Connect it to the power on push button on the front panel.
< N o t e >
In order to prevent the system from shut down by mistake, the CB656M-WE
m o t h e r b o a rd provides one optional item of the BIOS setup (refer to “Power
S e t u p ” ) .
This item is called “Power Button over ride”. The function is as follows:
E n a b l e d :
1. Pushing the button one time will change the system from Normal operation
mode to Suspend mode. Pushing the button again will wake up the system.
2. Pushing the power button more than 4 seconds will shut down the system.
D i s a b l e d :
Pushing the power button one time will turn the system on, pushing again
will turn the system off .
8. ATX Power Supply Connector (J25)
This connector connects to an ATX power supply. The plug from the power
supply will only insert in one orientation because of the diff e rent hole-size.
Find the proper orientation and push down firmly but gently making sure
that the pins aligned.
U s e r ’ s M a n u a l
1 7
C B 6 5 6 M - W E
CB656M-WE(2) 2000.10.17 3:54 PM 페이지17
