11
Setting and Using the Alarm Function
1.
Press and hold the
INFO/MENU
button (4) for 2 seconds to enter the radio menu.
2.
Press the
TUNE-
(10) and
TUNE+
(11) buttons
until ‘System’ is shown on the
LCD Display
(15), next
press the
SELECT/SNOOZE
button (7) to enter the system mode.
3.
Press the
TUNE-
(10)
and
TUNE+
(11) buttons
until “
Alarm
” is shown on the
LCD Display
(15)
–
press the
SELECT/SNOOZE
button (7) to select setting the alarm.
“
Alarm 1 Setup
” will be shown
on the
LCD Display
(15).
4.
Press the
TUNE
(10 & 11) buttons to select Alarm 1 or Alarm 2, press the
SELECT/SNOOZE
button
(7) to select the alarm to be programmed.
The alarm hour digits will now flash.
5.
Press the
TUNE
buttons (10 & 11) to adjust the alarm hour, press the
SELECT/SNOOZE
button (7)
to set the alarm hour.
The alarm minute digits will now flash.
6.
Press the
TUNE
buttons (10 & 11) to adjust the alarm minutes, press the
SELECT/SNOOZE
button
(7) to set the alarm minutes.
The alarm Duration time will now flash.
7.
Press the
TUNE
buttons (10 & 11) to adjust the alarm Duration time, select from
15, 30, 45, 60, 90
or
120
minutes, press the
SELECT/SNOOZE
button (7) to set the Duration time.
The alarm Source will now flash.
8.
Press the
TUNE
buttons (10 & 11) to select the alarm source as Buzzer, DAB or FM radio, press the
SELECT/SNOOZE
button (7) to set the alarm source:
a
. If Buzzer is the wake-up source selected, press the
TUNE
buttons (10 & 11) to select when you
require the alarm to sound: Daily, Once, Weekends or Weekdays. Press
SELECT/SNOOZE
(7) to
select the option.
b
. If DAB or FM wake up source is selected, press the
TUNE
buttons (10 & 11) to select from the
‘Last listened’ rad
io station or one of the radios presets. Press
SELECT/SNOOZE
(7) to select the
option. Next select when you require the alarm to sound: Daily, Once, Weekends or Weekdays.
Press
SELECT/SNOOZE
(7) to select the option.
9.
Set the alarm volume using the
TUNE
buttons (10 & 11), press
SELECT/SNOOZE
(7) to set the
alarm volume.
10.
Finally use the
TUNE
buttons (10 & 1
1) to select Alarm ‘On’ or ‘Off’, press
SELECT/SNOOZE
(7) to
set the alarm. The
LCD Display
(15
) will show “Alarm Saved”.
Once the alarm(s) is set, and the radio is in Standby, the alarm bell icon(s) will be shown on the right
of the
LCD Display
(15).
NB
The alarm volume will steadily increase from low to high once the alarm has sounded.
Silencing the alarm
Press the
On/Off/Standby
button (16) on the top panel to silence the alarm.
Snooze Mode
After the alarm sounds, the
SELECT/SNOOZE
button (7) can be pressed to snooze the alarm. The
alarm will be silent for a further 5 minutes before sounding again, the
LCD Display
(15) will show the
snooze countdown.
Press the
On/Off/Standby
button (16) to cancel the snooze mode and alarm.
Summary of Contents for AVS1399
Page 1: ...1 DAB FM Radio...
