background image

1. Safety Precautions

2

WARNING

: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE 

THIS APPLIANCE TO RAIN OR MOISTURE.

  CAUTION :

TO REDUCE THE RISK IF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS 
INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE 
PRESENCE OF UNINSULTED "DANGEROUS VOLTAGE"

 

WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE 
SUFFICIENT  MAGNITUDE TO CONSTITUTE A RISK OF 
ELECTRIC SHOCK TO PERSONS.

THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE
PRESENCE OF IMPORTANT OPERATING  AND MAINTENANCE 
(SERVICING) INSTRUCTIONS IN THE LITERATURE 
ACCOMPANYING THE APPLIANCE.

CAUTION

  TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC    
  PLUG WITH AN EXTENSION CORD, RECEPTACLE  OR OTHER OUTLET  
  UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE 
  EXPOSURE.

LASER SAFETY

  THIS UNIT EMPLOYS A  LASER. ONLY QUALIFIED SERVICE  PERSONNEL 
  SHOULD REMOVE THE COVER OR ATTEMPT TO SERVICE THIS DEVICE 
  DUE  TO POSSIBLE EYE INJURY.

  CAUTION :

 USE OF ANY CONTROLS, ADJUSTMENTS,  OR PROCEDURES 

  OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
  RADIATION EXPOSURE.

CAUTION :

 TO PREVENT  ELECTRIC SHOCK, MATCH WIDE BLADE OF 

PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION :

  POUR EVITER  LES CHOCS  ELECTRIQUES, INTRODUIRE 

LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON-
DANTE   DE LA   PRISE ET  POUSSER JUSQU'AU FOND.

Important Safety Instructions

- All the safety and operating instructions should be read before   

the appliance is operated.

- The safety and operating instructions should be retained for 

future reference.

- All warnings on the appliance and in the operating instructions 

should be adhered to.

- All operating and use instructions should be followed.
1.  Water and Moisture - The appliance should not be used near 

water - for example, near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool,
and the like.

2.  Carts and Stands - The appliance

should be used only with a cart or
stand that is recommended by th
manufacturer.

3.  An appliance and cart combination 

should be moved with care. Quick 
stops, excessive force, and uneven
surfaces may cause the appliance 
and cart combination to overturn.

4.  Wall or Ceiling Mounting - The appli-

ance should be mounted to a wall or

 ceiling only as recommended by the manufacturer.

5.  Ventilation - The appliance should be situated so that its 

location or position does not interfere with its proper 
ventilation.  For example, the appliance should not be situated 
on a bed, sofa, rug, or similar surface that may block the 
ventilation openings; or, placed in a built-in installation, such 
as a bookcase or cabinet that may impede the flow of air 
through the ventilation openings.

6.  Heat - The appliance should be situated away from heat 

sources such as radiators, heat registers, stoves, or other 
appliances (including amplifiers) that produce heat.

7.  Power Sources - The appliance should be connected to a 

power supply only of the type described in the operating 
instructions or as marked on the appliance.

8.  Grounding or Polarization - The precautions that should be 

taken so that the grounding or polarization means of an 
appliance is not defeated.

9.  Power - Cord Protection - Power-supply cords should be 

routed so that they are not likely to be walked on or pinched 
by items placed upon or against them, paying particular 
attention to cords at plugs, convenience receptacles, and the 
point where they exit from the appliance.

10.Protective Attachment Plug - If the appliance is equipped with 

an attachment plug having overload protection.  This is a 
safety feature. See Instruction Manual for replacement or 
resetting of protective device. If replacement of the plug is 
required, be sure the service technician has used a 
replacement plug specified by the manufacturer that has the 
same overload protection as the original plug.

11.Cleaning - The appliance should be cleaned only as 

recommended by the manufacturer.

12.Power Lines - An outdoor antenna should be located away 

from power lines.

CAUTION

RISK OF ELECTRIC SHOCKS

DO NOT OPEN

PORTABLE CART 

Figure 2

All manuals and user guides at all-guides.com

Summary of Contents for AMI-329LW




































Reviews: