NB
During the first few minutes of initial use, you may notice a
slight odour and a little smoke. This is normal and will quickly
disappear, It is the coating applied to the heating elements to prevent
any corrosion during transit.
Description of Parts
1. Thermostat Control
2. On/Off Switch
3. 1000w Heat Switch
4. 1000w Heat Switch
5. Flame Brightness Control
Before the first time you use your Stove Effect Heater
Please read these operating instructions thoroughly and keep them in a
safe place for future reference.
Remove all packing materials and discard responsibly.
Operating Instructions
– heat setting
Place the heater on a solid, level non-flammable surface.
To reveal the controls open the control panel door below the flame effect
door.
Ensure that all control switches are in the off position as in the image
above.
1
2 3 4 5
Flame Effect Door
Control Panel Door
Heat Outlet
