Swing Aside Mount Assembly
DSAM4
Printed in Canada Manufactured by Daedalus Technologies in Canada
www.daessy.com
Page 6 of 6
Install the Total Quick Release Base – TUSB
Remove the foam plug retaining the Pinch Clamp in its hole in the TUSB and slide it onto the Horizontal
Tube. The Pinch Clamp must be aligned in its hole so that it is even with the inside of the tube hole to
allow the tube to slide through.
1. Loosen the cable anchor bolt and slide the anchor off the end of the horizontal
tube.
2. Slide the TUSB onto the Horizontal
Tube. The Pinch Clamp must be aligned
in its hole so that it is even with the inside
of the tube hole to allow the tube to slide
through.
3. Position the angle of the quick release base and tighten the
Pinch Clamp bolt firmly to hold the TUSB in place.
4. Reinstall the cable anchor and firmly tighten the anchor bolt.
Quick Release Orientation
The Total Quick Release Base can be clamped at any location
along the Horizontal Tube and may be rotated around the tube to
place the mounted device at any angle. The normal orientation for
the TUSB is with the Locking Pin positioned away from the user. Adapters and Holders that attach
devices and computers onto the TUSB are assembled for this orientation.
Final Adjustments
Ensure that all of the fasteners are tight including; frame clamp, swivel clamp, and pinch clamp.
