DAELIM NS125III - SERVICE, Service Manual

Page: 25 / 203

Lubrication
2-4
Oil Filter Element Change
● Drain engine oil. ( 2-3)
● Remove the oil filter cover bolts, filter cover, filter
element and spring.
● Change the oil filter element with a new one.
●
Check the relief valve inside the oil filter cover for
satisfactory operation.
● Check if the oil filter seal is in good condition.
●
Assemble the filter element spring and filter cover,
and tighten bolts.
Torque value: Oil filter cover 1.1kg-m(11N.m.8ft-lb)
Oil Pump
● Remove the following parts:
- Luggage box ( ⇨ 4-5)
- Rear cushion bolt( ⇨ 6-2)
- RH. floor side cover( ⇨ 4-5)
- Exhaust muffler( ⇨ 4-9)
- Center cover (
⇨
4-4)
- Shroud ( ⇨ 8-2)
- Cooling fan(
⇨
8-2)
- R. Crank cover ( ⇨ 8-4)
- A.C. generator (
⇨
8-2)
- Starter driven gear and reduction gear ( ⇨ 8-5)
- Starter clutch (
⇨
8-6)
● Loosen the oil pump drive gear setting nuts.
●
Remove the oil pump drive gear.
● Remove the oil pump driven gear.
Oil filter cover
Element
Drive gear
Nut
Setting bolts
Oil filter seal