![background image](http://html1.mh-extra.com/html/daelim/et-250/et-250_service-manual_3155733046.webp)
Remove valve stem seals.
Clean carbon deposits in combustion chamber.
Clean residues and foreign materials on cylinder
head matching surface.
Caution
Do not damage the matching surface of cylinder
head.
6-5 Cylinder Head Inspection
Check if spark plug and valve holes are cracked.
Measure cylinder head warp with a straightedge and
thickness gauge.
Service limit: 0.5 mm
Camshaft
Inspect cam lobe height for damaged.
Service Limit:
IN: Replacement when less than 34.45mm
EX: Replacement when less than 34.30mm
Inspect the camshaft bearing for looseness or wear
out. If any damage, replace whole set of camshaft
and bearing.
Valve stem seals
Summary of Contents for ET-250
