OPERATING THE ENGINE 13
10. The oil pressure light should remain off during operation. If
the light comes on, stop the engine immediately to avoid
the possibility of severe engine damage, and check the
following:
!
!
!
!
!
Correct oil level.
!
!
!
!
!
Verify that the engine contains clean oil of the proper
viscosity.
!
!
!
!
!
Check for faulty wiring.
If the light still remains on, do not use the engine and consult
your DAEDONG dealer.
CAUTION
To avoid personal injury :
!
Keep children or non-essential bystanders
away from the engine while it is running.
IMPORTANT
!
Do not turn the starter switch to “START”
while the engine is running.
!
If the engine does not start in 10 seconds,
wait 30 seconds and repeat the starting
sequence. Never run the starter motor con-
tinuously for more than 20 seconds.
!
Always warm up the engine before working.
Using a cold engine will shorten its life.
(1) SPEED CONTROL LEVER
(2) ENGINE STOP LEVER
(A) “IDLING”
(B) “OPERATION”
(C) “START and OPERATION”
(D) “STOP”
1. Disengage any load from the engine.
2. Return the speed control lever to the “IDLE” position.
3. Move the engine stop lever to the “STOP” position.
4. Turn the starter switch to “OFF” and remove the key.
5. Return the engine stop lever to the “START” position for the
next start.
STOPPING
2
1
A
D
C
B
379O301A
Summary of Contents for 3C093
