16
All of our Daedalus e-spinners require 15V power. Our official
Daedalus Battery can change voltage simply by pressing the power
button until 15V appears. The Daedalus Battery uses an 18v 3amp
power supply. Do not swap this power supply with your wheel’s power
supply for any reason.
Input (long side of battery)
- for charging your battery
Output (short side of battery)
- for powering your wheel
Best Practices
• Do not attempt to charge the battery and operate the wheel
at the same time.
• Do not use your wheel’s power supply to charge the battery,
and vice versa, do not use the battery’s power supply to
power your wheel. Label your cords to avoid a mixup.
• If your e-spinner is going slower/faster than you remember
it spinning at your usual settings, check the battery setting to
ensure that it is still set to 15V.
• The battery will power off if the e-spinner is not drawing
enough power from it. This happens with the Sparrow if the
speed is set too low, and sometimes with the Starling. To
compensate for this, you can use a USB-powered light while
your battery is in use or simply charge your phone using the
USB port.
• To ensure the longest possible life for your Daedalus Battery,
please do not store it fully charged for extended periods of
time. The proper storage charge is between 50% and 75%.
Daedalus Battery
