![DAD TOURING 12AG2 User Manual Download Page 21](http://html1.mh-extra.com/html/dad/touring-12ag2/touring-12ag2_user-manual_3259319021.webp)
21
TOURING POWER
EN
IT
CONTROLLI
TOURING 15SA
150Hz, 120Hz, 100Hz, 80Hz
- Questi controlli
eliminano le frequenze superiori, rispettivamente
a: 150Hz, 120Hz, 100Hz, 80Hz.
TOURING 18SA - 218SA
120Hz STANDARD
- Questo controllo elimina le
frequenze superiori a 120Hz.
120Hz EXTEND.LOW
- Questo controllo elimina
le frequenze superiori a 120Hz ed esalta la rispo-
sta alle basse frequenze.
80Hz MULTI UNIT EQ
- Se si seleziona il preset 80
Hz, la frequenza di taglio superiore del sistema
viene ridotta da 120 Hz a 80Hz. Questa opzione
può essere utilizzata per compensare gli effetti
di accoppiamento stretto tra più unità sub woo-
fer della serie TOURING.
70Hz INFRA BASS
- Questo controllo riduce la
frequenza di taglio superiore ed estende la rispo-
sta del diffusore alle estreme basse frequenze.
INDICATORI LED
LIMIT/PROTECT
Funzione Protect
LED rosso illuminato fisso quando l’amplificatore
entra in modalità protetta per uno dei seguenti
motivi:
• Il dissipatore ha superato la temperatura limi-
te di lavoro.
• È presente un corto circuito sull’uscita
• Lo stadio di uscita è guasto.
Funzione Limit
LED rosso lampeggiante quando l’uscita dell’am-
plificatore è limitata.
Quando questo LED resta acceso in maniera con-
tinua ridurre il segnale di ingresso.
TEMP
- LED giallo illuminato quando la tempera-
tura del dissipatore raggiunge gli 80°. Il diffusore
continua comunque a funzionare. Se la tempe-
ratura continua a incrementarsi raggiungendo i
90°, il sistema di protezione diminuisce il segnale
in uscita e successivamente scollega il diffusore.
L’amplificatore entra nella modalità “mute” (LED
rosso illuminato). Il diffusore si riattiverà automa-
ticamente quando la temperatura scenderà sotto
CONTROLS
TOURING 15SA
150Hz, 120Hz, 100Hz, 80Hz
- These controls
eliminate frequency above: 150Hz, 120Hz,
100Hz, 80Hz.
TOURING 18SA - 218SA
120Hz STANDARD
- This control eliminates fre-
quency above 120Hz.
120Hz EXTEND.LOW
- This control eliminates
frequency above 120Hz, ensuring optimal listen-
ing and if more is required at low frequency.
80Hz MULTI UNIT EQ
- If you select 80 Hz, the
upper frequency of the system is reduced from
120 Hz to 80 Hz. This option can be used to offset
the effects of coupling between two or more sub
woofer.
70Hz INFRA BASS
- Lower the crossover fre-
quency the upper and extends response at low
frequencies.
LED INDICATORS
LIMIT/PROTECT
Protect Function
Red LED illuminates when the amplifier module
is in protect mode for one of the following rea-
sons:
• The heatsink reaches a temperature above
the normal working limit.
• There is a short circuit at the amplifier output.
• The amplifier output stages are faulty.
Limit Function
Red LED blinking when the output of the ampli-
fier is limited.
When this LED stays lit continuously reduce the
input signal level.
TEMP
- Yellow LED illuminated when the heat-
sink temperature reaches 80°. The speaker never-
theless continues to operate. If the temperature
continues to grow while reaching 90°, the pro-
tection system decreases the output signal and
then the disconnects the speaker. The amplifier
comes in a “mute” (RED LED illuminated).
The speaker will automatically reset when the
temperature drops below the threshold of 90°.
Summary of Contents for TOURING 12AG2
Page 1: ...MANUALE UTENTE USER MANUAL TOURING POWER ACTIVE PASSIVE LOUDSPEAKERS IT EN...
Page 37: ......
Page 38: ......
Page 39: ......