![background image](http://html.mh-extra.com/html/dacor/renaissance-rnrp30g/renaissance-rnrp30g_installation-instructions-manual_496421015.webp)
13
Installation Instructions
Assembling the Cooktop
WARNING
Never attempt to operate the range’s cooktop with any of the
burner rings, burner caps or grates removed.
Installing the Burners
There are two types of burners: the Simmer-Sear burner (left) and
the Standard burner (right). Refer to the illustrations and STEPS
below when intalling the burners and grates.
•
Either type (color) of the burner caps may be used.
•
When installing the burner components, twist each piece
back and forth slightly until it drops securely into place.
•
The burners will not operate properly unless all of the burner
pieces are properly seated.
•
Gently set the grates on top of the spill tray, and fit the legs of
each grate into its corresponding notch.
SimmerSear™ Burner Installation
Standard Burner Installation
STEP 1
:
Install burner
head.
•
Put burner
head tab in
keyed hole.
STEP 1
:
Put burner ring on
top of head.
STEP 2
:
Install burner ring.
•
Line up ring
tabs with head
slots.
STEP 2
:
Turn burner ring until it
drops into place.
STEP 3
:
Place burner caps on top
of rings.
•
Flat surface is
pointing upward.
STEP 3
:
Place burner cap on top
of burner ring.
•
Flat surface is
pointing upward.
Burner
head
Burner ring
Burner
ring
Burner base
Burner head
SimmerSear™
burner
Standard
burner
Spill tray
Keyed
hole
Burner cap
Summary of Contents for Renaissance RNRP30G
Page 18: ...16 Notes ...
Page 19: ...Notes ...