7
Setting Up Your Range
Installing the Oven Racks
WARNING
The oven racks become hot when the oven is in use.
The rack supports provide six heights for positioning
of the oven racks.
Three chrome-plated oven racks are provided.
Always remember to position the racks prior to
heating the oven.
To install a standard oven rack:
1. Insert the end of the rack with the safety
notches into the oven first.
2. Attach both sides of the rack to the rack sup-
ports in the oven as shown in the diagram
below.
3. Begin to slide the rack in, and then, lift up so
that the safety notches clear the ends of the
rack supports.
4. Push the rack all the way in with both hands.
To remove a standard oven rack:
1. Grasp it with both hands and pull gently straight
out toward you until it stops.
2. To remove the rack completely, lift the front of
the rack up about six inches and continue to
pull it out. Lifting the rack releases the safety
notches. The safety notches reduce the chances
of a rack coming out of the oven accidentally.
Standard Oven Rack
Front of rack
Back of rack
Rack support
Safety notch
Front of
rack
Rack
stop
Lift front safety
clips over rack
supports
Rack support
(inside oven)
Slide oven rack supports
between back safety clips
Front
safety clip
Rack guides
(fully extended)
To Insert a GlideRack
™
Oven Rack:
Your oven comes with Dacor GlideRack oven racks.
When you use them, you can effortlessly slide heavy
pots, pans or other items out of the oven to check,
stir or add ingredients quickly and safely.
1. Extend both rack guides completely as shown
below.
2. Align the safety clips (right and left) on the back
of the rack guides with the oven rack supports
as shown.
3. Insert the rack into the oven, sliding the rack
supports between the rear safety clips as shown.
As you slide it in, hold the front of the rack up
slightly until the front safety clips just clear the
front of the rack supports.
4. Lower the front of the rack so that the front of
the rack support is between the front safety clip
and the rack stop.
5. Grasp the rack in the front center and pull.
The rack should come forward while the guides
remain in place.
To Remove Your GlideRack Oven Rack:
1. Grasp the rack with both hands and pull it gently
straight out toward you until it stops.
2. Lift up until the front safety clips just clear the
front of the rack supports on the oven. Continue
to pull out. Moving the end of the rack back and
forth slightly, left to right, as you pull, will make
it easier to remove.
GlideRack
Oven Rack
