6
Cabinet/Countertop Dimensions (cont.)
Installation Requirements
Cutout tole1/16” (+1.6 mm) -0 unless otherwise noted.
Non-combustible
rear wall, rear of
mounting platform
10” (25.4 cm) min.
to combustible wall
above countertop,
both sides
Cabinet face
below countertop
overhang
Increase countertop and overhang
additional 2 1/2” (6.4 cm) min. for
combustible rear wall above
countertop
3/8” (1.3 cm)
countertop overhang
Hole 1/2” dia. (1.3 cm),
2 places, through platform
for hold down bolts
Gas/electrical utility cut-out in right rear corner of
mounting platform 8” W X 6” D (20.3 cm X 15.2 cm),
if gas and electrical are routed through bottom
1/2” (1.3 cm)
countertop
overhang
1” (2.5 cm) thick mounting platform min.
Countertop
Countertop
1/2” (1.3 cm)
countertop
overhang
2” (5.1 cm)
1” (2.5 cm)
11 7/16”
(29.1 cm)
24 5/8”
(62.5 cm)
CL
D
D
B
CL
CL
CL
Rangetop
Model
B - Cutout
Width
D - Hole
Offset
E - Downdraft
Vent Cutout
Approved Downdraft
Vent Models
EG366
36”
(91.4 cm)
16 5/8”
(42.2 cm)
33 1/2”
(85.1 cm)
ERV36, ERV3615,
PRV36
EG486
48”
(121.9 cm)
20 13/16”
(52.9 cm)
43 1/2”
(110.5 cm)
ERV48, PRV48
Cabinet/Countertop Cutout Dimensions without Downdraft Vent - Top View
Gas connection and power cord may be
routed through bottom or back of chassis
Gas and electrical connections at
right rear section of chassis
IMPORTANT:
Use only the downdraft vent models specified.