13
Installing the Unit in the Cabinet
1. Position the dishwasher in front of the cutout.
Make sure the drain hose, water supply line and
power cable are positioned in the utility cutouts
and are routed to the side they will be connected.
WARNING
Exercise care when installing or removing the
dishwasher to reduce the likelihood of damage to
the floor and to the power supply cable.
2. Slowly and gently slide the unit into the
dishwasher opening. As you do this, have
someone gently pull the drain hose, water supply
line and power cable through the access holes
into the adjacent cabinets. Exercise care to make
sure that the wiring and plumbing lines do not
become damaged.
3. Once the dishwasher is in place check to make
sure all slack is pulled out of the power cable,
water supply line and drain hose. Check to make
sure none of them are pinched or kinked.
NOtE:
Do not attach the mounting screws until after
Verifying Operation
.
Installation Instructions
Water Line Connection
CAUtION
•
The unit has a float switch in the base pan
to protect against flooding. If the inlet valve
connection on the dishwasher is not seated
properly, water may leak into the base pan and
activate the float switch.
•
To avoid water leaks, use only the water supply
line provided with the dishwasher..
1. Before connecting the water supply line, make
sure the water pressure and flow rate meet the
specifications on page 4.
2. Flush the water supply line prior to connecting it
to the dishwasher’s water supply line.
3. Insert the provided “O” ring in
the end of the water supply line.
Make sure it is evenly seated
on the end of the tubing.
4. Connect the end of the water supply line to the
water line. Tighten the connection by hand plus a
quarter turn with a crescent wrench.
Power cable and
water supply line
Drain hose
Water
supply line
Drain hose
Power
cable
2” dia.
max.
1 1/2” dia.
max.
Summary of Contents for RDW24
Page 19: ......