18
English
Operating the Cooktop
1. Place the burner ring so its base fits within the ridge
around the burner head, and rotate the ring until it
drops into place.
2. Place the burner cap so the ridge on the bottom of the
cap fits over the perimeter of the ring.
Assembling the Burners
Assembling a Standard Burner
• After assembly, always test the burners for proper func-
tion. Improperly assembled parts cause faulty ignition and
uneven flames.
• If the flame is excessively yellow, shut off the burner, and
let it cool. Adjust the caps, and reignite the burner. A good
flame is blue and consistent around the burner.
Assembling a SimmerSear
TM
Burner
1. Place the burner head so its locating tab is in the
base’s keyed hole.
2. Place the burner ring so the its tabs fit into the slots in
the head.
3. Place the burner cap so the ridge on the bottom of the
cap fits over the perimeter of the ring.
1. With two hands, grasp a grate with the short sides
oriented at the front and rear of the cooktop.
2. Gently set the grate on the cooktop so the grate's feet
rest in their corresponding dimples in the spill tray.
3. Repeat Step 2 for the remaining grate(s).
Placing the Cooktop Grates
The grates are identical, so you can place them in the left, center, or right position but always with the short
side toward the front/rear of the cooktop.
For ease of placement, each grate has rubber-tipped feet that fit in "dimples" formed into the cooktop spill tray.
Summary of Contents for HDER30S
Page 45: ...45 English Notes ...
Page 46: ...46 English Notes ...