37
English
Maintaining the Range
Using Self-Cleaning Mode, cont.
Self-Cleaning the Oven, cont.
• When self-cleaning is done:
– the door latch releases when the oven chamber has cooled sufficiently. The cleaning icon, lock icon, and
ON indicator disappear from the display. The oven is still hot.
– reinstall the convection filter before using the oven.
– a powdery residue normally coats the oven floor after self-cleaning. When the oven is cool, wipe the
residue with a damp cloth or sponge; run another cycle as needed to remove any residue that cannot be
wiped away with a cloth.
Setting Delayed Self-Cleaning
1. Prepare the oven for self-cleaning as instructed in the previous procedure, and close the oven door.
2. Tap
SELF CLEAN
>
START TIME
.
3. Enter a start time (e.g., for 12:30, tap 1-2-3-0). Maximum delay: 22 hr, 59 min.
4. Tap
START/CONTINUE
.
DELAY
appears on the display; the oven door locks. The oven will start self-cleaning at the set time.
• When you set the oven for delayed self-cleaning, you can push
CLOCK
to view the time of day; with the
clock displayed, you can push
START TIME
to check when self-cleaning will start. (When self-cleaning
starts,
DELAY
disappears from the display, and
ON
appears.
• To cancel time-delay self-cleaning, tap
CANCEL/SECURE
.
– If self-cleaning has not begun, the door will unlock 1 minute later.
– If self-cleaning has begun, the door unlocks when the oven chamber has cooled to about 400°F (205°C).
Summary of Contents for HDER30S
Page 45: ...45 English Notes ...
Page 46: ...46 English Notes ...
