background image

6

English

Important Safety Instructions

General Safety, cont.

• 

Do not use the rangetop as a space heater.

• 

Air curtains or range hoods that blow air downward shall not be used with a gas range unless the hood and 

range are designed and tested according to the Standard for Domestic Gas Ranges, ANSI Z21.1 • CSA1.1, and 

listed by an independent testing laboratory for combination use.

To reduce risk of property damage, fire, personal injury, and death:

If you smell gas:

• 

Close the valve and do not use the rangetop.

• 

Do not light a match, candle, or cigarette; or turn on any gas or electric appliances.

• 

Do not touch any electrical switches or plug in a power cord.

• 

Do not use any phone in your building, and evacuate the building.

• 

Immediately call your gas supplier from another building. Follow the supplier’s directions.

• 

If you cannot reach your gas supplier, call the fire department.

Checking for Gas Leaks

Leak-testing the appliance must be done as the manufacturer directs. Do not use a flame to check for gas 

leaks. With a brush, spread a soap-and-water solution around the area in question. If there is a gas leak, 

small bubbles will appear in the solution.

Fire Safety

To reduce risk of property damage, fire, personal injury, and death:

• 

Do not store/place/use combustible items (e.g., paper, plastic, fabrics, gasoline) near the range.

• 

Do not wear loose-fitting or hanging garments or accessories while using the range.

• 

Keep flammable items away from the cooktop burners.

• 

Regularly clean the oven vents.

• 

Do not use a towel or other bulky cloth as a pot holder.

• 

Do not douse a grease fire with water but turn off the burner, and if needed, use a multi-purpose, 

dry-chemical, or foam extinguisher.

• 

(Oven fires) Keep the door closed, and turn off the oven. Do not open the door until the fire is out. If needed, 

use a multipurpose, dry-chemical, or foam extinguisher.

• 

Do not heat sealed containers.

Gas Safety

Location Safety

To reduce risk of property damage, fire, personal injury, and death:

• 

Do not install the rangetop outdoors or where it will be exposed to weather/water or wind/ strong drafts.

• 

The rangetop must be installed within reach of a grounded, 3-prong outlet.

• 

Do not hang window treatments that could be blown onto the rangetop.

• 

For proper performance, the rangetop needs sufficient space all around the chassis.

• 

Wall coverings around the unit must withstand heat up to 194 °F (90 °C).

• 

Cabinet storage above the rangetop is discouraged but if unavoidable, leave at least 30 in. (76.2 cm) be-

tween the cooking surface and cabinet bottoms.

Summary of Contents for DTT48M876 Series






























Reviews: