10 English
Installation instructions
Installation instructions
Complete installation
1.
Check that all parts are now installed. If there is an extra parts go back through
the steps to see if any steps were skipped..
2.
Check that you have all of your tools.
3.
Dispose of/recycle all packaging materials.
4.
Use a mild solution or liquid household cleaner and warm water to clean
cooktop before use. Dry throughly with a soft cloth. For more information, see
the User’s Manual.
5.
Reconnect power.
If You Need Assistance or Service:
Please reference the “User Manual” or contact the dealer from whom cooktop was
purchased.
3-Wire Cable from Power Supply to 3-Wire Cable from Cooktop
IMPORTANT:
where local codes permit, 3-wire cable can be use to supply power.
In those cases connect connect cooktop ground wire to the neutral wire from the
junction box.
A
B
C
D
E
F
G
H
I
A.
3-wire cable from power
supply
B.
L1 wires
C.
Ground (G) or bare ground
wire (from cooktop)
D.
3-wire cable from cooktop
E.
Junction box
F.
N (normally White) wire (from
power supply)
G.
UL listed wire connector
H.
L2 (normally Red) wires
I.
UL listed or CSA approved
conduit connector
1.
Disconnect power.
2.
Remove Junction box cover, if present.
3.
Connect the flexible cable condult from
the cooktop to the junction box using
a UL listed or CSA approved condult
connector.
4.
Tighten screws on condult connector, if
present.
5.
Connect the two L2 wires together using
the UL listed wire connectors.
6.
Connect the two L1 wires together using
the UL listed wire connectors.
7.
Connect the Ground (G) or bare ground
wire from the cooktop cable to the
Ground (G) or bare ground wire (in the
junction box) using a UL listed wire
connectors.
8.
Install junction box cover.
9.
Reconnect power.
DTI36P876BB,DTI30P876BB_DG68-01292A-00_EN+MES+CFR.indb 10
2020-06-02 �� 1:21:04
