Dacor DOP36M96GL Series User Manual Download Page 59

Page: 59 / 106

English

Using the oven

Temperature table

Type of food

Internal temperature (°F)

Beef / Lamb

Rare

140-150

Medium

160-170

Well done

175-185

Pork

175-185

Poultry

185-195

NOTE

If you cover the meat with aluminum foil and allow it to stand for 10 minutes after
cooking, the Internal temperature will rise 5-10 degrees.

Removing the temperature probe

Unplug the temperature probe, then remove it from the meat. Store the meat probe in a
separate place, do not leave it attached to the socket.

CAUTION

After cooking, the temperature probe is hot enough to cause burns. Let it cool sufficiently
before attempting to remove it.

NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-00_EN.indd 59

2019-02-06 2:30:35

Summary of Contents for DOP36M96GL Series











































































































Search results

Summary of Contents for DOP36M96GL Series

Reviews:

Related manuals for DOP36M96GL Series

Brands by name

Popular brands

Dacor DOP36M96GL Series, User Manual

Search results

Summary of Contents for DOP36M96GL Series

Reviews:

Related manuals for DOP36M96GL Series

Brands by name

Popular brands