Dacor Discovery DYF42SBIWS, Installation Instructions Manual

Page: 10 / 20

8
INSTALLATION REQUIREMENTS
To accommodate the refrigerator, the cabinet “cutout” must
conform to these details:
• Cutout dimensions: 42”W x 84”H x 24”D (1067mm x
2134mm x 610mm).
• Install the refrigerator so it can be pulled from the cutout
for service/cleaning without detaching the water line.
• The cutout’s floor must be at the same level as the
kitchen floor. (The refrigerator cannot be on a raised
platform/flooring or sub-floor.)
• The refrigerator’s face (excl. handles) must be flush with
the cabinetry on either side.
• The water line can enter the cutout through the floor,
lower rear wall, or lower cabinetry side wall. (The graphic
shows the floor and side walls.) The shut-off valve must
be easily accessible for service/emergencies.
• The water line connects the house’s cold-water line with
the refrigerator’s water-line connector. (The line should
be long enough to reach the front of the refrigerator.)
• Dacor recommends that while preparing the refrigerator
for installation, you place a mat under the refrigerator to
prevent damage to the flooring.
Cabinet Cutout Dimensions