Dacor DISCOVERY DYF42BNDI, Installation Instructions Manual

Page: 9 / 22

7
Installation Requirements
Spacer Panel
¼" (6.35 mm)
¾" (1.9 cm)
1" (2.5 cm)
½" (1.3 cm)
1"
1 ¼"
1 ½"
1"
(2.5 cm)
1 ¼
(3.2 cm)
"
1½
(3.8 cm)
"
Refrigerator
Side Trim
Door
Hinge
Ba
cker
P
anel
Overl
ay
P
anel
(2.5 cm)
(3.2 cm)
(3.8 cm)
(1.3 cm)
Cabinetry
(1.9 cm)
½"
¾"
The custom door panels and adjacent cabinetry must be designed so that there is sufficient clearance for the doors to swing open. If
the refrigerator is to be installed close to the wall, see Door Swing 90° on following page.
NOTE : Rout the hinge side of the
custom door panels to a radius that
is equal to at least half the thickness
of the panel if a 130° door swing is
desired. See Adjust Doors .
NOTE : Allow ½ (1.3 cm)
clearance between
overlay panel and
cabinetry.
Door Panels and Cabinetry Clearance - Door Swing 110°
Refrigerator to
Cabinetry Clearance
Door swing 110° actual size
When the doors are closed the refrigerator will extend beyond the face of the adjacent cabinetry to some degree.