ENGLISH
11
Care and Maintenance
Filters and drip tray
1. Use 2 hands to remove the filters. Grasp the filter handles, pull toward the front of the hood, and then pull down on
rear handle to remove. Repeat for each filter.
1
2
Model shown for reference only, features may vary
2. For Pro-Canopy models only, remove drip tray from the drip tray bracket.
C
B
A
A. Drip tray
B. Drip tray bracket
C. Drip tray screws
• Wash filters and drip trays as needed in a dishwasher or hot detergent solution to clean.
• For Pro-Canopy models only place drip tray in its original positon, replace and tighten drip tray screws.
3. To reinstall the filters by grasping the filter handles with both hands and then place the front edge of the filter into
the hood.
4. Push up on the back the handle, and then set rear of filter into the drip tray to secure. Repeat for each filter.
1
2
Replacing strip LED
The strip LED is replaceable by a service technician only. See the support contact information in the Warranty section.
