Dacor DDW24S Service Manual Download Page 4

2

Service Manual - Dishwasher Models DDW24S, RDW24I and RDW24S

Important Information About 

Safety Instructions

•  The 

Important Safety Instructions

 and warnings in 

these instructions are not meant to cover all possible 

problems and conditions that can occur. Use common 

sense and caution when installing, maintaining or oper-

ating this or any other appliance.

•  Always contact the Dacor Customer Service Team 

about problems and conditions that you don’t under-

stand. See 

Customer Service Information

.

Important Safety Instructions

Safety Symbols and Labels

 DANGER

Immediate hazards that 

WILL

 result in severe personal 

injury or death.

 WARNING

Hazards or unsafe practices that 

COULD

 result in severe 

personal injury or death.

 CAUTION

Hazards or unsafe practices that 

COULD

 result in minor 

personal injury or property damage.

 WARNING

This appliance is equipped with a three prong grounding 

plug for your protection against possible electric shock 

hazards. It must be plugged into a dedicated, grounded 

electrical outlet. Where a standard two prong electrical 

outlet is encountered, it is the personal responsibility 

and obligation of the customer to have it replaced with a 

dedicated, properly grounded three prong electrical outlet. 

Do not under any circumstances:

 

♦ Cut or remove the third (ground) prong from the 

power cord. 

 

♦ Use an adapter plug. 

 

♦ Use an extension cord. 

 

♦ Use a power cord that is frayed or damaged.

 

♦ Use of a ground fault interrupter (GFI) is not  

recommended.

 DANGER

IMPORTANT

: Do not store or use combustible, 

flammable or explosive vapors and liquids (such as 

gasoline) inside or in the vicinity of this or any other 

appliance. Also keep items that could explode, such 

as aerosol cans, away from the range or cooktop. Do 

not store flammable or explosive materials in adjacent 

cabinets or areas.

 WARNING

DISCONNECT POWER TO THE APPLIANCE BEFORE 

SERVICING.

Three prong 

grounding plug

Grounding 

type 

electrical 

outlet

Summary of Contents for DDW24S

























Reviews: