12
Service Manual - Dishwasher Models DDW24S, RDW24I and RDW24S
L1
T1
T2
L2
T4
L8
L3
T5
L9
L4 L5 L6
D1, 15,
D2, D3
11, 12,
13, 14
Troubleshooting
Opening the service menu
Make sure the dishwasher main power switch is off. Switch on the main power switch (1/0). Wait
for the numeric display to light up. Within 5 seconds, press PROGRAM (T1) and then press START
(T2), and keep them pressed for 5 seconds. (L1), (L3) and (L6) lit indicates that the service menu
is activated. When the service menu is opened the most recent of the error messages (D1), (15),
(D2) and (D3) is shown. In order to keep the last error message in the display, release START first,
otherwise the next step in the service menu is activated. All error messages are erased by a total
reset. The service menu is closed by turning off the power to the machine.
P
START
START
Press the button START to navigate the menu system step by step.
PROGRAM
Press PROGRAM repeatedly to scroll between settings. Press PROGRAM to save the setting and
continue to the next menu step.
START
Press START at the last step of the menu to close the service menu and save the most recent set-
tings.
Menu step/Turn/Push Numeric Display Comments/instructions
START
PROGRAM
d:01
Mixer valve and inlet valve on (1 second delay between mixer
valve, if available, and inlet valve)
d:02
Inlet valve and mixer valve, if available, off for 1 second then inlet
valve on
d:03
Not used
d:04
Detergent/rinse aid dispenser
d:05
Circulation pump on
d:06
Circulation pump and heater on - max. 75°C (167°F)
d:07
Drain pump on
d:00
No components on
START
PROGRAM
P: 0
Normal water intake, default setting
P: 5
Water intake increases by +5%
P:10
Water intake increases by +10%
P:15
Water intake increases by +15%
L: 0
Time, flow meter switched off, intake time: pulse value x 0.068 [s]
L: 5
Time-controlled water intake increases by +5%
L:10
Time-controlled water intake increases by +10%
L:15
Time-controlled water intake increases by +15%
Service Menu - DDW24S
Diagnostics
Water intake