Troubleshooting
Troubleshooting
English
38
Symptom
Possible Cause
Action
Water remains in the
dishwasher after a
cycle has finished.
The drain hose is folded or
clogged.
• Straighten and unclog the
hose.
Food remains on
dishes
An incorrect cycle was selected.
• Select a cycle according to
the soil level of the dishes
as instructed in this manual.
The filters or nozzles are
clogged or not correctly
fastened.
• Clean the filters or nozzles.
Make sure the filters are
correctly fastened. See the
Cleaning
An insufficient amount of
detergent or no detergent was
used.
• Use the correct amount of
detergent for each load.
We recommend using a
powdered or gel type of
detergent.
The water pressure is low.
• Make sure the pressure is
between 20 psi and 120 psi
(140-830 kPa).
The water temperature is low.
• Connect the water supply
line to a hot water supply.
For best performance, the
temperature of the supplied
water must reach 120 °F
(49 °C).
Dishes improperly loaded or
overloaded.
• Arrange the dishes so
they do not interfere with
the nozzles and/or the
detergent dispenser. See the
Loading dishes
section on
The water is too hard.
• Use a commercial
dishwasher cleaner.
• Use high-quality, fresh
detergent with rinse aid.
• Clean the filter at least once
per month.
• Use a water softener
additive designed for
dishwashers featuring the
water softener.
DACOR_DW9500MD_DD68-00196A-05_EN.indd 38
DACOR_DW9500MD_DD68-00196A-05_EN.indd 38
2021-06-14 오후 4:01:37
2021-06-14 오후 4:01:37
