GIR-2005 User Manual
18
All Rights Reserved
Use
key to move cursers from right and left to choose the mode, and select a
mode and push enter key again to save.
HPA Off Delay Setting.
Push
or
to move to HPA OFF DELAY sub-menu. Push
to select. Initial
setting will appear. Move cursers from right to left to the point where you need to
change numbers and enter numbers with number key, then enter key again to save.
Cooling Fan Setting.
Escape from previous screen, Push
or
to move to 5. FAN CTRL and push
to select. Initial setting will appear.
Use
key to move cursers from right and left to choose the mode, and select a
mode and push enter key again to save.
Under AUTO mode, if temperature goes down below 30
℃
, the fan stops
working, stays in between 30~40
℃
, it works with medium speed, and over
40
℃
, its speed up with maximum speed.
Measuring Temperature.
