GIR-2005 User Manual
17
All Rights Reserved
IDU Attenuator setting
will show up and Push
To change value setting push
and the first digit of
will blink.
Push
keys to move left and right where to change numbers.
Push
~
key or
to increase/decrease number values.
Push
key to save the setting and blinking will stop. Also can hear a beep sound
and ‘Acknowledge’ will appear when new setting is properly saved.
If new set up is failed, you can hear long beep sound and “Receive No Response”
will appear, and blinking starts. In order to stop blinking push
and return to the
initial setting.
ODU Attenuator setting
Enter ATTN. ADJ. Menu, and push
or
to select ODU ATTN. And enter the
menu. To change value and save, follow directions states above.
HPA Mode Setting.
In the status of ODU ATTN menu, push
or
to move HPA MODE CTRL.
Push
to select it. Initial mode (On, Off, Auto) will appear.
