GIR-2005 User Manual
10
All Rights Reserved
2.1 Fixing
Outdoor Unit either can be installed to the wall or mast Pipe. If you select a wall to fix,
do same as what you did with Indoor Unit. If you select a mast pipe to fix, first find
the solid structure and fix the 20~30mm diameter pipe to it, and assemble ODU to the
pipe using a wall and pipe bracket.
Fig 3-4 Outdoor Unit Fixing to the wall
2.2 Grounding
After GIR-2005 Outdoor Unit is fixed, should ground it using 14 Square Cable
connected to the grounding post of GIR-2005 chassis and earth where has good
connectivity.
2.3 Connecting Internal antenna with cables
Connect cables with TX/RX making to relevant place of ODU using specified cables
like figure from each of TX RX patch antennas to IDU like figure 3-5. Please note that all
the procedure must take while power is off.
4×(2×M4 Bolt)
4×M7 Anchor Bolt
