
4. Front panel
4.1 DN100 : Explanation of Display Screen in the Front panel
○
1
minus code
○
2
measured value
○
3
Setting value HI
○
4
Setting value LO
○
5
OK determination
○
6
HI, LO determination
○
7 HOLD
○
8
Modulation (stable, unstable)
○
9
, ○
10
, ○
11
, ○
12
operation and setting
Key
○
1
Minus code
: Indicate (-) code of measured value or setting value.
○
2
Measure value
: Indicate measured value or setting value.
Indication of Decimal point can be set in Function Mode.
○
3
,○
4
Setting value HI, LO : Indicate setting value HI, LO
○
5
OK determination : Light a LED when measured data are within setting value(HI, LO)
○
6
HI, LO determination: Light a LED when measured data are beyond upper limit(HI), lower
limit(LO) or less.
○
7
HOLD : Indicated when measured data are hold and at the time when it starts after peak
hold reset.
Indicated in Function Mode.
○
8
Modulation
: Indicated only when measured data is unstable.
○
9
: Press this Key more than 3 seconds when entering setting mode. Besides, it is
used as an ESC key when getting out of setting mode.
○
10
: This Key makes shift the action value of blinking number when setting.
This makes
actually me
the displayed value and output value of measured value zero, irrespective of
asured present value(Data zero).
○
11
: This Key increases the action value of selected number 1 by 1.
Press the Key more than 3 seconds when entering Calibration mode.
○
12
: Use this as an Enter Key when memorizing various setting value.
It is used a
hold) funct
08(printer),
s a HOLD input key when using HOLD(sample hold, peak hold, interval peak
ion, and another press makes release from HOLD function. When using op-
exercise printer function whenever input.
7