25
Although D.A.C.E. supply an on-board receiver, D.A.C.E. can not guarantee that the range of the receiver. In
the event of the on-board receiver not having enough range or a pedestrian trigger is required, an external
receiver must be added. This receiver should be placed about two meters above the motor. The receiver is
wired as shown bellow.
CONNECTING AN EXTERNAL RECEIVER (OPTIONAL)
NB the normally open (NO) connector is wired to the TRIG, this will trigger the gate fully open.
Receiver board
Main P.C.Board
Wiring diagram for a main trigger
NB the normally open (NO) connector is wired to the PED this will trigger the gate to partially open.
The gate will auto-close after 5 seconds.
Receiver board
Main P.C.Board
Wiring diagram for a pedestrian trigger
