dabotek BS310, Manual

Page: 8 / 33

Intended purpose
The BS304/306/308/310 line of stud welding equipment is intended to weld studs under DIN32501 or
special-purpose welding elements,manufactured DABOTEK, onto appropriatematerials.
Welding method: Capacitor discharge welding with tip ignition.
You can attach DABOTEK handguns, semi-automatic or automatic welding heads to the wel-
ding equipment. Anything going beyond that is considered outside the intended (contractual) use. The
manufacturer cannot be held responsible for any damages resulting from such use. The operator bears
the risk.
The term .intended use. includes compliance with the Operating Instructions and the specifiedmainte-
nance conditions.
The welding equipment is intended primarily for use in industrial areas.
In other areas, we cannot always warrant electromagnetic compatibility.
General
The BS304/306/308/310 types of stud welding equipment belong to the same equipment family and are
distinguished only by the amount of energy each of them uses for welding.
-
All types in this line are equipped with processor control.
- Capacitor charging voltage can be entered directly in volts or indirectly by entering the stud diameter.
When entering the stud diameter, the appliance sets itself automatically to anempirical value. Correc-
tions are possible.
- Different operating states are displayed by symbols in the display.
Field of application of the welding equipment
All DABOTEK welding heads can be attached.
Ever since 01.01.96, all welding heads come equipped with a 12-pole equipment plug.
If you want to connect older welding heads you need to change the equipment plug or use a suitable
adapter. Such adapters are available from our delivery programme.
Standard stud dimensions
The standard studs according to DIN 32501 listed in the following table can be welded using the BS
... line of equipment. For our complete stud program, please refer to our stud catalogue.
Equipment
type Stud Ø Material
BS 304 1-4 St. 37-3 1.4303 AlMg3 CuZn37
BS 306 2.5-6 St. 37-3 1.4303 AlMg3 CuZn37
BS 308 3-6 AlMg3 CuZn37
3-8 St. 37-3 1.4303
BS 310 3-6 AlMg3 CuZn37
3-8 St. 37-3 1.4303
10 St. 37-3 1.4303
Hinweis: The values shown in the above table are approximate. Weldability will vary with the welding
head, the material, and the surface condition of the workpiece. Specific cases may deviate
from the values listed above. Most materials feature a strong decline of weldability for stud
diameters of 6 mm and more. Make sure to trail-weld before you start production welding!