34
CORRECTIVE AND PREVENTIVE MAINTENANCE AND PRESERVATION
Attention
- In order to prevent risks and damages to equipment, make sure that the liquid does not
enter into the equipment.
- To cleaning the equipment, using the damp cloth with a mild soap. The application of
other solvent-based cleaning products or sodium hypochloride isn’t recommended, because
they may damage the equipment.
Cleaning
Important: In order to execute cleaning or any type of maintenance, ensure that the equipment is
disconnected from the electrical network.
Additional procedures for reuse
The equipment can be reused in undetermined, i.e. unlimited, quantities, only needing to be cleaned
and disinfected.
Disinfection
- Use clean and soft cloth dampened in alcohol 70% to disinfection of the equipment.
- Never use corrosive disinfectants or solvents.
WARNING
For preventing contamination, use gloves and other protection systems during disinfection.
Even that, during the procedures, gloves are used, after removing gloves the hands must
be washed out.
Curing Light
*
THIS EQUIPMENT IS NOT SUPPLIED STERIL, IT MUST BE CLEANED AND STERILIZED BEFORE
ITS FIRST USE
Only the light conductor must be sterilized in the following conditions:
- Maximum temperature of 135ºC.
- The light conductor must be packed properly cleaned.
- Do not sterilize the light conductor in contact with other kinds of material.
Reservoirs
It’s highly recommended the cleaning of the water reservoirs, using chlorinated water solution 1:500.
*
Optional
