Dabi Atlante eagle.IOS, Owner'S Manual

Page: 42 / 72

42
5.4.4. Bite alignment
In the case of a quadrant sweep, you will be prompted to sweep only the side of the quadrilateral.
When scanning the full arc, you will be prompted to scan bilaterally.
When selecting "bite", wait a few seconds for the arc sweeps to load.
1. Scanning the occlusion.
1.a. To capture the bite, you will begin scanning
the central molars, capturing the mandibular and
maxillary teeth on the first pass. Then scan only the
maxillary molars and gum up to the arc.
1.b.
When the arc is locked, the arc will get the
initial sweep overlaid and a green checkmark will be
displayed as described on the side, indicating that
you have finished digitizing that arc. When the arc
is complete, repeat the process for the opposite arc.
1.c. Once the bite alignment is complete, you can
rotate the 3D image to confirm correct patient
occlusion.