Screen Motor
The SCB-100 has two motor outputs. This allows control of two screens or a screen and a projector lift independently.
1. Connect the motor wires in the screen junction box to the SCB-100 as shown in diagram 2.
2. Use 14-18 gauge wire to extend the motor wire to the required length.
Power Source
1. Connect power wires to the SCB-100 as shown in diagram 3.
2. Connect the building ground wire to the ground lug on the metal housing.
Diagram 2
SCREEN #2
OR
PROJECTOR
LIFT
SCREEN #1
WHITE - COMMON
BLACK - DOWN
RED - UP
WHITE - COMMON
BLACK - DOWN
RED - UP
Diagram 3
SOURCE INPUT
100-240 VAC
GREEN - GROUND
BLACK - HOT
WHITE - COMMON
2
INSTALLATION
SOURCE INPUT
100-120 VAC
SCREEN #2
OR
PROJECTOR
LIFT
SCREEN #1
BLUE - COMMON
BROWN - DOWN
BLACK - UP
BLUE - COMMON
BROWN - DOWN
BLACK - UP
SOURCE INPUT
240 VAC