background image

A Milestone AV Technologies Brand 
3100 North Detroit Street 
Post Office Box 137 
Warsaw, Indiana 46581-0137 
P: 574.267.8101 or 800.622.3737 
F: 574.267.7804 or 877.325.4832 
E: [email protected]

www.da-lite.com

DL-0114  12.12

©2012 Da-Lite Screen Company LLC. Printed in U.S.A.

lIMItED FIVE YEAR WARRAntY on DA-lItE ContouR

®

 ElECtRol PRoDuCtS onlY

Da-Lite Screen Company LLC warrants these products to the original purchaser only, to be free from defects in materials and workmanship for a 
period of five (5) years from the date of purchase by the original purchaser provided they are properly operated according to Da-Lite’s instructions 
and are not damaged due to improper handling or treatment after shipment from the factory.

This warranty does not apply to equipment showing evidence of misuse, abuse or accidental damage, or which has been tampered with or repaired 
by a person other than authorized Da-Lite personnel.

Da-Lite’s sole obligation under this warranty shall be to repair or to replace (at Da-Lite’s option) the defective part of the merchandise. Returns for 
service should be made to your Da-Lite dealer. If it is necessary for the dealer to return the screen or part to Da-Lite, transportation expenses to 
and from Da-Lite are payable by the purchaser and Da-Lite is not responsible for damage in shipment. To protect yourself against damage or loss in 
transit, insure the product and prepay all transportation expenses.

tHIS WARRAntY IS In lIEu oF All otHER WARRAntIES, EXPRESS oR IMPlIED, InCluDInG WARRAntIES AS to FItnESS FoR 
uSE AnD MERCHAnt ABIlItY. 

Any implied warranties of fitness for use, or merchantability, that may be mandated by statute or rule of law 

are limited to the five (5) year warranty period. This warranty gives you specific legal rights, and you may also have other rights, which vary from 
state-to-state. 

no lIABIlItY IS ASSuMED FoR EXPEnSES oR DAMAGES RESultInG FRoM IntERRuPtIon In oPERAtIon oF 

EQuIPMEnt, oR FoR InCIDEntAl, DIRECt, oR ConSEQuEntIAl DAMAGES oF AnY nAtuRE.

In the event that there is a defect in materials or workmanship of a Da-Lite product, you may contact our Sales Partners at PO Box 137, Warsaw, IN 
46581-0137, 574.267.8101, 800.622.3737.

IMPoRtAnt: tHIS WARRAntY SHAll not BE VAlID AnD DA-lItE SHAll not BE BounD BY tHIS WARRAntY IF tHE PRoDuCt IS 
not oPERAtED In ACCoRDAnCE WItH DA-lItE’S WRIttEn InStRuCtIonS.

Keep your sales receipt to prove the date of purchase and your original ownership.

88819

Summary of Contents for Contour Electrol













Reviews: