11
www.d16.pl
Signal FlOw
•
BaSic mOduleS
Late reflections tab
This tab controls the
Late reflections
of the reverb.
Section controlling Late reflections’ tail
The following parameters can be selected:
•
Size
- Size of the room.
•
Bass cut
- controls the properties of the reflecting surface with respect to bass frequencies. Bass frequencies are cut below the value
selected. The range is from 0Hz to 22kHz.
•
Feedback
– Controls how much of wave energy is consumed every reflection. The less value the more energy consumes every
reflection, that means the feedback is weaker then.
•
Attenuation
- This parameter changes the characteristic of the reflecting surface - it’s damping properties.
•
Diffusion
– Is the reflecting surface’s ability to spread the echos out. If this parameter is set to
Sharp
, the reflecting surface is perfect-
ly flat and does not distort reflected waves. If this value is set to
Smooth
, the reflecting surface distorts the waves and spreads them
out into different directions.
•
Modulation
- This controls the
late reflections
delay lines modulation
