Filter section
•
Feedback
- Sets feedback value of the
Delay
effect.
•
Cutoff
- Sets the cutoff frequency of the filter in the delay loop.
•
Resonance
•
Filter Type
-
OFF
(no filter),
LP
(low-pass filter),
BP
(band-pass filter),
HP
(high-pass filter).
Chorus
The
third
FX
channel is
Chorus
; its parameters are located in a strip on the right side of the channel.
The Chorus FX channel strip
All
Chorus
parameters are accessible and none are hidden in an
Edit
panel. We can distinguish the following set of
parameters:
•
Offset
- Sets the offset between the dry signal and the closest LFO oscillations controlling the delay lines,
expressed in milliseconds.
•
Depth
– Sets the amplitude of
LFO
oscillations, expressed in milliseconds.
•
Rate
- Controls
LFO
frequency [
0.01 Hz - 20 Hz
]. The
LFO
waveform is triangular.
•
Mode
- Sets the volume of the second delay line, making the chorus sound fuller.
•
HP
- Controls high-pass filter cutoff frequency on the output from the
Chorus
.
•
Stereo
- This is the stereo phase offset of the
LFO
controlling the delay line.
56
mixeR •
fX channeL strips
