The oscillators’ waveform options
Clicking the sine wave icon in the VCO section:
Accessing the VCO modifiers panel
We get access to the
VCO Waveform Options
panel.
The VCO modifiers panel
SuperSaw
The
SuperSaw
mode is controlled by one button and two knobs.
SuperSaw mode
•
Super
- Activates and deactivates SuperSaw mode and the following parameters:
•
Amt
- Sets the effect strength; the bigger the value is, the more saw oscillators are added.
•
Detune
- Sets the detune value between additional saw oscillators.
Note: Please note that
SuperSaw
and
Hard Sync
cannot work simultaneously. If you turn on
Hard Sync
mode,
SuperSaw
will
be automatically disabled.
19
layeR PaRameteRs •
sOund synthesis
