Oscillators’ hard restart option
Oscillators’ hard restart
The
Osc Reset
(
Oscillators Hard Restart
) option is turned off by default. If activated, a given
Layer’s
oscillators’ phases
(
VCO
) are reset each time a new note is played. The
Legato
(overlapping notes) in monophonic mode is an exception,
where a new incoming note does not reset oscillator phases, even with
OSC Reset
activated.
VCO settings
Clicking the
Cog
icon next to the
VCO
label, you can access the
VCO Settings
panel.
The Cog icon in the VCO section
The VCO settings panel
From here, you can control the
Pitch Drift
option, which is a random, wandering pitch change that affects each oscilla-
tor independently. It gives the characteristic of an unstable vintage analog synth. The greater the value, the bigger the
drift; a value of 0 (default) means no drift at all.
21
layeR PaRameteRs •
sOund synthesis
