D-Teg Smarty BX1000, User Manual

Page: 15 / 22

Drive Partner for your Safety
26
BX1000 / BX1000 Plus User Guide
www.d-teg.com
2
SETTING DRIVE RECORDER
1. Click [Recorder Setting] icon for setup.
[Recorder Setting] icon
Caution
Backup the SD data first,
before clicking initialize
SDcard button.
Once done, the old data
cannot be recovered.
bACkUP EVENT/LOG FILES
13. Click [Backup Event/Log files] icon to backup the files to the PC.
[Backup Event/Log files] icon
Select [Event data] or [Normal data] and select [Log data] first, before
clicking the [Backup Event/Log files] icon. Then selected Event or Normal or
Log data list are on the Backup windows.
To backup the whole data from SD card to the PC, check [Backup All]
Recording Method
Event Record (Automatically starts Recording by
G-sensor event or Record Button)
Normal Record (Automatically starts continuous
Recording just after Power on)
Image Resolution 60x0(High), 320x20(Low)
Frame Rate
‘30’ fps means Real Time recording
Event Record supports 10, 1, 30 fps
Normal Record supports 1, , 10, 1 fps
Image Quality
High (Large file size, but good picture quality)
Low (Small file size, but low picture quality)
Event Record Time
This menu is for Event Record.
Pre-record/Post-record time can be set here.
Recording Mode
Overwrite (The image data is overwrites the oldest
files when the SD memory is full.)
One time (The recording stops automatically when
the SD memory is full.)