Document Number:
V013421_05_MiniRad-V_Manual_Installation_Instructions
Date:
8/28/2019
Page:
2 of 13
D-tect Systems
•
11814 South Election Rd. Suite 200, Draper, UT 84020
•
(801) 260-4000
1
Welcome
Congratulations on your recent purchase of the Mini Rad-V G2 Vehicle-Mounted Radiation Detector. The
Mini Rad-V quietly scans the environment around the vehicle to find any sources of gamma radiation. If
gamma radiation is detected, the Mini Rad-V gives clear audio and visual alarms proportional to the
presence of radiological materials nearby. The Mini Rad-V features a simple layout and automatically
calibrates itself to natural background radiation.
2
G2 Updates
The G2 model includes improved ruggedization enhancements to the internal electronics and the exterior
housing. Upgrades to the surface mounting and component potting on the inside of the case and a more
robust FET to contribute to a significantly improved durability and anti-shock capabilities. An anodized
aluminum shield protects the detection unit at the cable penetration. A self-diagnostic feature based on
various light sequences displayed on the display/alarm notify the user of specifi , and the installation process
was re-evaluated and is now simpler and more straightforward.
A new shield has been included to mitigate the collection of snow, ice and moisture on the Exterior Detector
housing.
The entire installation process was re-evaluated as well and is now simpler and more straightforward. That
required a new more robust FET and subsequently more revamping of the board.
3
Installation Warning
Warning:
Do NOT apply power to the In-Cab Display module before connecting it to the External
Detector module.
Please read all installation instructions in section 5 before installing the Mini Rad-V system.
Applying power to the In-cab Display module before connecting the other communication cable can
provide an electrical shock and cause an electrical failure to the In-cab Display module and void the
warranty. The In-Cab Display module should always be connected to the External Detector module
BEFORE power is applied. Failure to follow the instructions in this manual may damage the unit.
4
System Overview
4.1 Modules
The Mini Rad-V consists of two modules: The In-Cab Display module (Figure 1: In-Cab Display Module)
and the External Detector module (Figure 2: External Detector Module). The In-Cab Display module
receives power via a cable connected to the back of the unit. The unit is powered by two lead lines attached
to the fuse box. The In-Cab Display module is connected to the External Detector module via a
communications cable.
Dimensions
•
In-Cab Display Module − 2.8” × 1.82” × 1” Weight: 0.4 lbs.
•
External Detector Module − 4.7” × 3.14” × 1.7” Weight: 1.2 lbs.
