manualshive.com logo in svg

D.T.Systems SPT 2420, Owner'S Manual

Share
Download
D.T.Systems SPT 2420 Owner'S Manual Download Page 6

INDIVIDUAL MODEL FEATURES

SPT 2420 and SPT 2422

•  The SPT 2420 features Momentary (Nick) Stimulation,

Continuous Stimulation, Jump Stimulation (patent pend-
ing), Rise Stimulation (patent pending) and Positive
Vibration.  

•  The SPT 2422 has the same features as the SPT 2420

and comes with two Collar Receiver units (orange and
black) which are operated from the same transmitter.
You can switch from one collar to the other by pressing
the Collar Selection button on the transmitter.  The LCD
display shows which of the two collars is currently being
operated.

SPT 2430 and SPT 2432

•  The SPT 2430 features Momentary (Nick) Stimulation,

Continuous Stimulation, Jump Stimulation (patent pend-
ing), Rise Stimulation (patent pending) and Positive
Vibration.  It also features a beeper with three functions:
Locate, Run/Point, and Point Only.

•  The SPT 2432 has the same features as the SPT 2430

and comes with two Collar Receiver units (orange and
black) which are operated from the same transmitter.
You can switch from one collar to the other by pressing
the Collar Selection button on the transmitter.  The LCD
display shows which of the two collars is currently being
operated.

6

Summary of Contents for SPT 2420

























Reviews:

No comments

Brands by name

Popular brands

Load more brands