D.T.Systems SPT 2420, Owner'S Manual

Page: 14 / 24

SWITCHING BETWEEN COLLARS
(TWO DOG MODELS)
14
With SPT Two Dog Systems (2422 & 2432) you
can control two dogs with one transmitter. The
LCD display shows whether you are currently
controlling the Orange Collar Receiver (ORG) or the Black
Collar Receiver (BLK). To switch the currently active col-
lar, simply press the Collar Selection button (marked
“O/B”).
BEEPER/LOCATOR
The SPT 2430 and 2432 models also feature a beeper with
Locate, Run/Point, and Point Only modes.
1. Locate: The collar will emit a continuous beep as long
as the LOCATE button is pressed (top button on the left
side of the Transmitter).
2. Run/Point: The collar will beep every 2 seconds when
the dog is on point, and will beep every 5 seconds when
the dog is moving (middle button on the left side of the
Transmitter).
3. Point Only: The collar will beep every 2 seconds when
the dog is on point and will remain silent when the dog is
moving (middle button on the left side of the transmitter).
To activate or switch between Run/Point and Point Only
modes, press the Run/Point Mode button once. Press the
LOCATE button to cancel the Run/Point modes.