9
PARTS & FUNCTIONS
‘BIRD’ Button
- Activates Motor Arm to raise Ratcheting
Safety Arm and release Ratcheting Cocking Lever to fire
Dummy Launcher.
‘BEEPER’ Button
- Activates Beeper/Locator to help audi-
bly locate the launcher in the field from up to 450 yards
away.
Launcher Selector Knob
- Chooses which launcher is be-
ing controlled. The RDL Transmitter can control up to 16
different launchers.
Transmitter LED Indicator Light
- The red LED light will
turn on any time a Transmitter button is pushed to indicate
that the Transmitter is being operated. If the red LED light
blinks rapidly after pushing any Transmitter button, the 9-
volt battery will need to be replaced soon.
Transmitter Antenna
- Be sure to check that the Antenna
is securely fastened to the Transmitter before each use.
Hand-tighten only. Be careful when screwing the Antenna
into the Transmitter. Over-tightening the Antenna can
cause damage to the Antenna and/or the Antenna mount.
‘T’ Switch
- The “T” Switch should always be in the up posi-
tion when operating the Launcher.
Battery Cover
- Slides open to access Battery Compart-
ment.
Battery Compartment
- Houses 9V Alkaline battery.
Lanyard Connection
- Lanyard can be connected to the
top of the Transmitter (Lanyard included).
