18
TURNING REMOTE RECEIVER ON/OFF
Turning Remote Receiver OFF
1. Push and hold the Power Button on the Remote Re-
ceiver. The Red LED will light solidly for about 2 sec-
onds followed by one short flash while holding button.
2.
Release the Power Button after the one short flash.
The unit is now OFF.
Turning Remote Receiver ON
1. Push and hold the Power Button on the Re-
mote Receiver. The Red LED will light solidly
for about 2 seconds while holding button.
2. Release the Power Button when the Red LED light
goes off. The unit is now ON and the Red LED light will
now flash approximately once every second.
Power-Save Mode on Remote Receiver
After 1 hour of inactivity, the Remote Receiver will go into
Power-Save Mode (the LED light will flash approximately
once every 3 seconds).
This mode reduces battery use and will make responses to
the Transmitter less immediate. You may have to press
and hold the ‘BIRD’/‘BEEPER’ buttons for a few seconds to
get the desired launch/beep.
Once the remote Receiver responds or is reset/restarted,
the Power-Save Mode will be canceled.
WARNING - Do not turn unit ON/OFF while Launcher
is loaded with a Power Load.
NOTE
- The Transmitter is in a permanent “sleep” state
and is only active when a button is pressed.
