manualshive.com logo in svg

D.O.Tel Co., LTD. DOT 320, User Manual

Share
Download
D.O.Tel Co., LTD. DOT 320 User Manual Download Page 135

Chapter 11.  Appendix  129 

 

Battery Power 

To prevent an unexpected system fault of DOT 320 due to a power problem, refer to the 
following. 

Using DOT 320 for the first 
time 

When you unpack DOT 320, the battery may have been 
discharged. Be sure to charge the battery fully with the 
battery charger before use. 

Charging the battery 

When charging the battery, be sure to check that the battery 
charger and DOT 320 are connected properly and that the 
battery charger is well connected to the electric outlet. 

Batter Low icon appears on 
the task bar, or the battery 
warning is displayed in the 
dialog box 

Charge the battery using the battery charger. The DOT 320 
may be used while charging the battery. 

Device has lost power 
while the power is on 

Since the battery power is very low, charge the battery for a 
certain time before using DOT 320. If DOT 320 is left 
uncharged when the battery power is very low, the power 
will not be supplied to the CPU of DOT 320, and DOT 320 
will be hardware reset, resulting in loss of all data and files 
stored in DOT 320. 

DOT 320 will not be in use 
for a long time 

Turn off the power of DOT 320 using the power button. 

Tap Start > Settings > Control Panel > Power > Power Off 
and set the power to be turned off if DOT 320 remains idle 
for a certain time for efficient use of power. 

Saving power 

Tap Start > Settings > Control Panel > Display > Backlight 
and set the LCD Backlight to be turned off automatically 
when DOT 320 is not in use to save the battery power. 

Also, tap Start > Programs > Utility > Backlight to adjust 
the brightness of the LCD Backlight. 

Automatic power-off does 
not work 

When DOT 320 is connected with the PC, the power is not 
turned off automatically. Therefore, while DOT 320 is in 
connection with the PC, connect the battery to the docking 
cradle. 

Insufficient power warning 
appears while using CF 
Card 

Remove the CF Card from DOT 320 and recharge DOT 
320 using the battery charger. 

Power is lost during use 

DOT 320 has turned off the power automatically due to 
insufficient battery power and has entered the safety mode. 
Do not use DOT 320 forcibly, but use it after recharging the 
battery. 

 

Summary of Contents for DOT 320




















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands