- 19 -
2) Programming ID ON/OFF:
3) DISPLAY POSITION:
<I/D SET>
MONITOR:01[ON]
Move Position with a Joystick
Press ENTER, SAVE
CAMERA:001
Press [F/F] key to launch programming ID ON/ OFF.
To select monitor, move the joystick up/ down ward.
To select ON/OFF, move the joystick left and
right.
Press [F/F] button to save setup and then press [F/N] button for the
previous menu, [SET] to completely escape from OSD Menu.
To enter OSD menu, press [F/F] button and wait for few seconds.
By moving the joystick, place the camera ID to the
location as you desire.
Press [F/F] button to save setup and then press [F/N] button for the
previous menu, [SET] to completely escape from OSD Menu.
[Advice]
: You are required to set slowly. Because it needs some time to memorize.
Summary of Contents for DMX-25632
