D-MAX DMX-25632, User Manual

Page: 12 / 28

- 12 -
4.1. SETUP FOR MATRIX MAIN & SUB KEYBOARD (INITIALIZING)
--- Setting Matrix Keyboard ---
<MAIN MENU>
Plug in power cable (RJ-45) and hold down the
SET
button for 3
seconds until you hear a beep. Then keep your finger off from the
SET
. button for the initial setup on the keyboard LCD.
<Matrix Keyboard>
MAIN(0)
SUB KEY No(1->8)
Press Numeric Key
<Matrix Keyboard>
MAIN (0)
SUB KEY Q’ TY (1->8)
Press Numeric Key
<User Keyboard Set
〉
1.Matrix 2.TX Key
3.Receiver Select
4.Alarm Set
Press
1
button and set a matrix keyboard.
1. Matrix: choose when you use a matrix switcher.
2. TX Key: Used to operate PTZ camera directly with DCK-255 with
no matrix switcher (DMX-25632).
(Default value is set as this mode, TX Key)
3. Receiver Select:
Select a protocol according to receiver model.
(D-MAX and other vendors’).
4. Alarm Set:
1) Used to connect sensors with speed dome camera.
2) Used to connect sensors with alarm receiver unit.
*** Select 1 here to operate matrix system. ****
Press
0
button and it will be set as a main keyboard.
Select the Sub Keyboard Quantity
1
~
8
.
(Press the number according to the sub keyboard installed.
You are required to press 8 if you use a DIU-800.)
1
2
3
4. FULL & DETAILED INSTRUCTIONS