15
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
• Nothing appears on the screen.
-
Check that the power cord and line connection between the camera and monitor are
fixed properly.
-
Check that you have properly connected VIDEO cable to the camera VIDEO output jack.
• The image on the screen is dim.
-
Is lens stained with dirt? Clean your lens with soft, clean cloth.
-
Set the monitor to proper condition.
-
If the camera is exposed to too strong light, change the camera position.
• The image on the screen is dark.
-
Adjust the contrast feature of the monitor.
-
If you have an intermediate device, set the 75
Ω
/ Hi-z properly.
• The camera is not working properly, and the surface of the camera is hot.
-
Check that you have properly connected the camera to an appropriate power source.
•
• The Motion Detection function does not work.
-
Check that MOTION DET of SETUP menu is ‘OFF’.
• Color is not correct.
-
Check the setting of WHITE BAL SETUP menu.
• The screen flickers continually.
-
Check that direction of camera turns toward the Sun.
• When coaxial communication is not available:
-
Make sure that the camera and monitor are installed within the recommended distance.
-
Use the video amplifier equivalent to coaxitron if the recommended installation distance
is exceeded.
• IR-LED isn't lighted.
-
Isn't DAYNIGHT function setting up the color mode.
-Please change the AUTO or B/W mode.
4. Troubleshooting