35
Problem
Solution
No display
• Check the power cable and the wiring between the camera and
the monitor.
• Ensure proper video cable connection (Video Out Jack).
Dim display
• The lens could be dirty. Clean with a soft, clean piece of cloth.
• Adjust monitor settings.
• Adjust camera position if exposed to a strong light source.
Dark display
• Adjust the monitor's contrast level.
• Set the intermediate device, if in use, to 75
Ω
/ Hi-z
The camera is not functioning properly
and its surface is hot.
• Check the power source for compliance with specifications
Auto mode of DAY/NIGHT is not
selected or not active.
• Ensure DAY/NIGHT mode, the mode set to “AUTO”
• Ensure AGC mode is set to “ ON”
Motion Detection feature is not active.
• Ensure that the feature is set to ON
Improper color
• Check the “WHITE BAL” mode, the setting is properly.
Uneven colors Flickering
• Adjust and configure WHITE BAL
• The camera may be facing the sun or a fluorescent light. Adjust
the position of the camera.
SENS-UP feature is not active.
• Ensure AGC menu is set to ON.
• Ensure SHUTTER MENU is set to MANUAL
.
7. Troubleshooting
